Introducere
The VOX StompLab 1G is a compact multi-effects modeling pedal designed for guitarists. It offers a wide array of sounds and effects, categorized by musical style for ease of use. This manual provides essential information for setting up, operating, and maintaining your StompLab 1G pedal.
Figura 1: Față view of the VOX StompLab 1G Multi-Effects Modeling Guitar Pedal.
Caracteristicile produsului
- 100 programe presetate: A total of 100 preset programs are categorized into styles such as rock, blues, metal, and pop, allowing for quick sound selection.
- Interfață ușor de utilizat: Designed for intuitive operation, enabling even novice users to instantly access desired sounds.
- 103 Modeling Effects: Provides 103 types of modeling effects for diverse sound shaping.
- Advanced Sound Engine: Each effect model utilizes a sound engine derived from the acclaimed VOX VT+ series of modeling amps and ToneLab series multi-effect units.
- 20 User Programs: Allows users to edit and save up to 20 custom programs.
Înființat
Powering the StompLab 1G
The StompLab 1G can be powered by either an AC adapter (9V DC) or four AA batteries. An AC adapter is recommended for stable performance, especially during extended use.
- Conexiune adaptor CA: Connect the 9V DC power adapter to the DC 9V input jack on the rear panel of the unit.
- Instalare baterie: For portable use, install four AA batteries into the battery compartment located on the underside of the pedal. Refer to the "Maintenance" section for detailed battery installation instructions.
Conectarea echipamentului
Conectați chitara la mufa INPUT și la amplifier or headphones to the OUTPUT/PHONES jack. The OUTPUT/PHONES jack supports both stereo and mono connections.
Figure 2: Rear panel connections for input, output, and DC 9V power.
Video 1: This video provides an unboxing and initial overview of the StompLab 1G, demonstrating its physical features and basic connections.
Instrucțiuni de operare
The StompLab 1G features an intuitive control layout for easy sound manipulation.
Comenzi terminateview
- CATEGORY Knob: Use this knob to select from various musical style categories (e.g., Rock & Roll, Blues, Pop, Jazz/Fusion, Ballad, Hard Rock, Metal, Hard Core, Other). Each category contains multiple preset programs.
- GAIN / VALUE1 Knob: Adjusts the gain level of the selected effect or changes the value of parameters during editing.
- LEVEL / VALUE2 Knob: Controls the overall output level or changes the value of parameters during editing.
- FOOTSWITCHES (DOWN/UP): These footswitches allow you to navigate through programs (DOWN/UP) and activate the Bypass/Tuner function by holding both simultaneously.
- Butonul EDITARE: Used to enter edit mode for customizing programs.
- EFFECT TYPE Button: Selects the effect type within a program during editing.
Figure 3: Control panel with Category, Gain, Level knobs, and footswitches.
Selectarea programelor
- Rotiți CATEGORIE knob to select a musical style.
- Utilizați JOS şi UP footswitches to cycle through the preset programs within the selected category. The display will show the program number.
Utilizarea tunerului
To activate the built-in tuner, press and hold both the JOS şi UP footswitches simultaneously. The display will show tuning information. Press either footswitch again to exit tuner mode.
Video 2: This video demonstrates various effects and sounds from the StompLab series, including the bass guitar version, showcasing the versatility of the pedal's modeling capabilities.
Întreţinere
Înlocuirea bateriei
To replace the batteries in your StompLab 1G, follow these steps:
- Ensure the unit is powered off and disconnected from any power source.
- Întoarceți cu grijă unitatea cu susul în jos.
- Unscrew the four rubber feet on the bottom panel. These feet also secure the battery compartment cover.
- Remove the bottom panel to access the battery holder.
- Replace the old AA batteries with four new ones, ensuring correct polarity (+/-).
- Securely reattach the bottom panel and screw the four rubber feet back into place.
Video 3: This video demonstrates the process of adding or replacing batteries in the StompLab effects pedal.
Curatenie
Ștergeți unitatea cu o cârpă moale și uscată. Nu utilizați substanțe de curățare abrazive sau solvenți.
Depanare
- Fără sunet:
- Verificați toate conexiunile prin cablu (chitară la intrare, ieșire la amp/căști).
- Ensure the power adapter is securely connected or batteries are correctly installed and charged.
- Verify the unit is powered on.
- Check the volume levels on the StompLab 1G, your guitar, and your amplifter/căști.
- Unexpected Sound/Distortion:
- Adjust the GAIN and LEVEL knobs.
- Ensure the correct program/effect is selected for your desired sound.
- Verificați dacă există cabluri defecte.
- Unitatea nu pornește:
- Dacă folosiți baterii, înlocuiți-le cu unele noi.
- If using an AC adapter, ensure it is the correct 9V DC type and is functioning properly.
Specificații
| Numărul de model | STOMPLAB1G |
| Dimensiuni | 7 x 2 x 7 inci |
| Greutatea articolului | 2.72 uncii |
| Sursa de alimentare | Battery Powered (4 AA batteries) and AC Adapter (9V) |
| Materialul corpului | Metal |
| Culoare | Negru |
| Tip conector | Cric de 1/4 inch |
| Interfață hardware | Audio de 1/4 inch |
| Formatul semnalului | Analogic |
Ce este în cutie
- VOX StompLab 1G Multi-Effects Modeling Guitar Pedal
- Adaptor de alimentare
- Manual de utilizare (acest document)
- 4 baterii AA (preinstalate sau incluse separat)
Garanție și suport
For warranty information and technical support, please refer to the official VOX website or contact your local VOX dealer. Keep your purchase receipt as proof of purchase for warranty claims.