Manual de instrucțiuni pentru subwooferul auto activ Peiying NB-3000

1. Introducere

Thank you for choosing the Peiying NB-3000 Active Car Subwoofer. This compact and powerful audio solution is designed to enhance your in-car listening experience by delivering deep, rich bass. Its ultra-flat design allows for versatile placement in vehicles with limited space. Please read this manual thoroughly before installation and operation to ensure proper use and maximize performance.

2. Informații de siguranță

AVERTIZARE: Improper installation or use can lead to serious injury or damage to the product and vehicle.

• Deconectați întotdeauna borna negativă a bateriei vehiculului înainte de a începe orice lucrare electrică.
• Ensure all wiring is properly routed and secured to prevent pinching, cutting, or short-circuiting.
• Folosiți cabluri cu calibru corespunzător pentru conexiunile de alimentare și împământare, așa cum este specificat în acest manual.
• Nu instalați subwooferul în locuri unde ar putea obstrucționa vederea șoferului. view sau interferează cu funcționarea vehiculului.
• Avoid installing the unit in areas exposed to direct sunlight, excessive heat, moisture, or dust.
• Consultați un instalator profesionist de sisteme audio auto dacă nu sunteți sigur de vreun aspect al procesului de instalare.
• Do not attempt to open or modify the unit. This will void the warranty and may cause damage.

3. Produs terminatview și Caracteristici

The Peiying NB-3000 is an active (amplified) car subwoofer designed for powerful bass reproduction.

Caracteristici cheie:

• 20 cm (8-inch) active subwoofer with 1000 W maximum power output.
• Flat metal enclosure for low vibration and compact installation.
• Integrated MOSFET power ampmai în viață.
• High-level and low-level (RCA) inputs for versatile connection options.
• Wired remote control for convenient bass level adjustment.

Identificarea componentelor:

4. Configurare și instalare

Proper installation is crucial for optimal performance and safety. If you are not confident in performing the installation yourself, please seek professional assistance.

4.1. Plasare

The compact design of the NB-3000 allows for flexible placement. Common locations include:

• Under a car seat (ensure adequate clearance and ventilation).
• In portbagaj.
• Behind a rear seat.

Secure the subwoofer firmly to prevent it from moving during vehicle operation. Use mounting brackets or straps if provided or necessary.

4.2. Conexiuni de cablare

Before making any connections, ensure the vehicle's battery negative terminal is disconnected.

1. Conexiune alimentare (BATT+): Connect a suitable gauge power cable (e.g., 8 AWG or 10 AWG, depending on cable length and power requirements) directly from the vehicle's positive battery terminal to the "POWER" terminal on the subwoofer's high-level input connector. Install an in-line fuse (e.g., 20A-30A) within 18 inches (45 cm) of the battery.
2. Conexiune la pământ (GND): Connect a short, heavy gauge ground cable (same gauge as power cable) from the "GND" terminal on the subwoofer's high-level input connector to a clean, unpainted metal surface of the vehicle chassis. Ensure a good electrical contact.
3. Pornire de la distanță (REM): Connect a remote turn-on wire from your car stereo's remote output (usually a blue/white wire) to the "REM" terminal on the subwoofer's high-level input connector. This wire tells the subwoofer to turn on and off with your car stereo. If your stereo does not have a remote output, you may need to use an ignition-switched 12V source.
4. Intrare audio:
   • Intrare de nivel scăzut (RCA): If your car stereo has RCA pre-outs, connect RCA cables from the stereo's subwoofer or rear pre-outs to the "CH1" and "CH2" RCA inputs on the subwoofer.
   • Intrare la nivel înalt: If your car stereo does not have RCA pre-outs, connect the speaker wires from your stereo's rear speakers to the "HIGH LEVEL INPUT" terminals on the subwoofer's connector. Ensure correct polarity (+ to + and - to -).
5. Controlul nivelului de la distanță: Connect the wired remote control cable to the "REMOTE" port on the subwoofer's control panel. Mount the remote control in a convenient location for the driver.

După ce ați efectuat toate conexiunile, reconectați borna negativă a bateriei vehiculului.

5. Instrucțiuni de utilizare

Once installed, you can adjust the subwoofer's settings for optimal sound.

5.1. Pornirea inițială

Turn on your car stereo. The "POWER" indicator light on the subwoofer's control panel should illuminate (green). If the "PROTECT" light (red) illuminates, there may be a wiring issue or fault. Refer to the Troubleshooting section.

5.2. Reglarea comenzilor

• AMPLIFICARE (MIN/MAX): This knob controls the input sensitivity. Start with the GAIN set to minimum (MIN). Play music with a moderate bass level. Slowly increase the GAIN until the bass output blends well with your main speakers without distortion. Avoid setting the GAIN too high, as this can cause distortion and damage.
• FREQ (frecvență): This knob adjusts the low-pass filter (LPF) crossover frequency, typically from 50Hz to 160Hz. The LPF ensures that only low frequencies are sent to the subwoofer. Adjust this to blend smoothly with your main speakers. A common starting point is around 80-100Hz.
• FAZĂ (0°/180°): This switch adjusts the phase of the subwoofer's output relative to your main speakers. Listen to music with strong bass and switch between 0° and 180°. Choose the setting that provides the most impactful and cohesive bass response.
• REMOTE (Level Control): The wired remote control allows you to conveniently adjust the subwoofer's output level from the driver's seat without accessing the main unit.

6. Întreținere

The Peiying NB-3000 requires minimal maintenance.

• Keep the unit clean by wiping it with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Verificați periodic toate conexiunile cablurilor pentru a vă asigura că sunt sigure și fără coroziune.
• Ensure the area around the subwoofer is clear to allow for proper ventilation.

7. Depanare

If you experience problems with your subwoofer, refer to the following troubleshooting guide.

8. Specificații

The following are the technical specifications for the Peiying NB-3000 Active Car Subwoofer:

9. Garanție și asistență

The Peiying NB-3000 Active Car Subwoofer comes with a limited warranty. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer.

For technical support or service inquiries, please contact the authorized Peiying dealer or the point of purchase.