Eaton OS310U-W-K Motion Sensor Switch User Manual

1. Introducere

The Eaton OS310U-W-K is a motion-activated occupancy sensor wall switch designed to automatically control lighting based on room occupancy. This device enhances energy efficiency by turning lights on when a person enters a room and off after a selectable time delay once the room is vacated. It is compatible with a wide range of lighting loads, including incandescent, magnetic low voltage (MLV), electronic low voltage (ELV), fluorescent, compact fluorescent (CFL), and LED lights, as well as motors up to 1/6 HP.

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Eaton OS310U-W-K motion sensor switch.

2. Informații de siguranță

AVERTIZARE: To avoid fire, shock, or death; turn off power at the circuit breaker or fuse box and test that the power is off before wiring. All wiring must be performed in accordance with national and local electrical codes.

• Deconectați întotdeauna alimentarea cu energie de la întrerupătorul de circuit înainte de instalare sau service.
• A neutral wire is required for the installation of this device. Verify your switch box wiring includes a neutral wire before proceeding.
• Acest dispozitiv este destinat numai utilizării în interior.
• Do not use with dimmable fluorescent fixtures unless specifically rated for occupancy sensor control.
• Dacă nu sunteți sigur de vreo parte a procesului de instalare, consultați un electrician calificat.

3. Caracteristicile produsului

• Funcționare automată: Lights turn on automatically upon motion detection and off after a set delay.
• Compatibilitate versatilă: Works with incandescent, MLV, ELV, fluorescent, CFL, and LED lighting loads, as well as 1/6 HP motors.
• Acoperire largă: Oferă un câmp de 180 de grade de view and up to 1000 square feet of major motion coverage.
• Cablare flexibilă: Supports both single-pole and 3-way wiring configurations.
• Întârziere reglabilă: Selectable time delays of 5 seconds (test mode), 5 minutes (factory default), 15 minutes, and 30 minutes.
• Ambient Light Override: Previne aprinderea luminilor dacă există suficientă lumină naturală.
• Lumină de noapte integrată: Selectable on/off LED nightlight with press-and-hold dimming function.
• Walk-in-Delay Feature: Shortens the time delay when motion is detected briefly, saving energy.
• Moduri de operare: Toggle between auto-on/auto-off or manual-on/auto-off modes.
• Funcție de bypass: Allows the sensor to operate as a traditional manual on/off switch.
• Indicator LED: Green LED indicates load status, acts as a locator light in the dark, and blinks upon motion detection.
• Decorator Style: Includes a mid-size decorator wall plate.

4. Configurare și instalare

The Eaton OS310U-W-K is designed to fit into a standard wall box and replaces a traditional light or fan switch. Installation requires a neutral wire. If your existing switch box does not have a neutral wire, consult an electrician.

4.1 Cerințe de cablare

• Cabluri necesare: Ground, Hot (Line), Load, and Neutral.
• 3-Way Configuration: For 3-way operation, an additional traveler wire is needed. Note that 3-way wiring for this sensor switch differs from standard 3-way switches; the wiring is effectively in parallel. Refer to the detailed wiring diagram provided with your product packaging for specific instructions.
• The device comes with 6-inch pre-stripped #14 AWG wire leads for connection.

4.2 Etapele de instalare

1. Opriți alimentarea: La întrerupătorul de circuit sau la cutia de siguranțe, opriți alimentarea la locația întrerupătorului. Verificați dacă alimentarea este oprită folosind un volmetru.tage tester.
2. Scoateți comutatorul vechi: Scoateți cu grijă placa de perete existentă și întrerupătorul din cutia de perete. Deconectați firele de la vechiul întrerupător, notând conexiunile acestora.
3. Identificați firele: Identify the Line (Hot), Load, Neutral, and Ground wires in the wall box. The neutral wire is typically white.
4. Conectați noul comutator: Connect the wires from the Eaton OS310U-W-K switch to the corresponding wires in the wall box using wire nuts. Ensure all connections are secure.
   • Connect the green wire from the sensor to the bare copper or green ground wire in the wall box.
   • Connect the black wire from the sensor to the Line (Hot) wire.
   • Connect the red wire from the sensor to the Load wire (to the light fixture).
   • Connect the white wire from the sensor to the Neutral wire.
   • For 3-way installations, refer to the specific wiring diagram provided with the product.
5. Comutator de montare: Carefully fold the wires into the wall box and secure the switch to the wall box with the provided screws.
6. Instalați placa de perete: Attach the decorator mid-size wall plate.
7. Restabiliți puterea: Reporniți alimentarea la întrerupător.

Image of the Eaton OS310U-W-K motion sensor switch in white, showing its decorator style and push-button interface.

5. Instrucțiuni de utilizare

5.1 Automatic Operation (Occupancy Mode)

In this mode, the lights will automatically turn on when motion is detected and turn off after the set time delay once the room is vacant. This is the default operating mode.

5.2 Manual-On / Auto-Off Mode (Vacancy Mode)

To switch to manual-on/auto-off mode, press and hold the main switch button for a few seconds until the indicator light changes. In this mode, you must manually turn on the lights by pressing the switch button. The lights will then automatically turn off after the set time delay when no motion is detected.

5.3 Bypass Feature (Traditional Switch Mode)

The bypass feature allows the sensor to function as a traditional manual on/manual off switch, ignoring motion detection. Consult the product's detailed instructions for how to activate and deactivate this mode, typically involving a specific press-and-hold sequence.

5.4 Funcția de lumină de noapte

The integrated LED nightlight can be turned on or off and its brightness adjusted. Press and hold the nightlight button (if separate) or a specific section of the main button to dim the nightlight. The nightlight provides a locator light in the dark.

5.5 Indicator LED

A green LED on the switch indicates the load status (lights on/off). It also serves as a locator light in dark conditions and blinks to signal motion detection.

6. Setări de configurare

The Eaton OS310U-W-K offers several adjustable settings to customize its operation. These settings are typically accessed by removing the wall plate and adjusting small dials or switches on the device itself.

6.1 Time Delay Adjustment

The time delay determines how long the lights remain on after the last detected motion. Available settings include:

• 5 seconds (Test Mode)
• 5 minutes (Factory Default)
• 15 minute
• 30 minute

6.2 Ambient Light Override

This setting allows you to prevent the lights from turning on automatically if there is sufficient natural light in the room. This feature helps conserve energy by ensuring lights are only activated when truly needed.

6.3 Walk-in-Delay

The walk-in-delay feature intelligently shortens the time delay if motion is detected only briefly, further optimizing energy savings.

7. Întreținere

The Eaton OS310U-W-K motion sensor switch requires minimal maintenance.

• curatenie: Pentru a curăța dispozitivul, ștergeți ușor suprafața cu o lavetă moale șiamp Nu utilizați produse de curățare abrazive, solvenți sau substanțe chimice dure, deoarece acestea pot deteriora finisajul sau componentele interne.
• Inspecţie: Periodically inspect the switch and wall plate for any signs of damage or loose connections. If any issues are found, turn off power at the circuit breaker and address them or consult a qualified electrician.

8. Depanare

If you encounter issues with your Eaton OS310U-W-K motion sensor switch, refer to the following common problems and solutions:

9. Specificații

10. Garanție și asistență

10.1 Garanția producătorului

Eaton products are backed by a manufacturer's warranty. Please refer to the warranty information included with your product packaging or visit the official Eaton webpentru detalii privind termenii, condițiile și durata garanției.

10.2 Suport tehnic

For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact Eaton customer support. Contact information can typically be found on the product packaging, the Eaton website, or by searching for 'Eaton Electrical Support'.

When contacting support, please have your product model number (OS310U-W-K) and purchase date available.