D-Link DHP-1320 Wireless-N PowerLine Router User Manual

1. Introducere

The D-Link DHP-1320 Wireless-N PowerLine Router combines wireless networking with PowerLine AV technology, allowing you to extend your network using your home's existing electrical wiring. This device provides both Wi-Fi and wired connectivity for various devices.

Figure 1: D-Link DHP-1320 Wireless-N PowerLine Router

Această imagine prezintă partea din față view of the D-Link DHP-1320 Wireless-N PowerLine Router, highlighting its compact design and external antennas.

Caracteristici cheie:

• IEEE 802.11n and 802.11g Compliant for Wi-Fi connectivity.
• Up to 300 Mbps throughput for Wi-Fi networks.
• Up to 200 Mbps throughput for PowerLine AV networks.
• Utilizes your home’s existing electrical wiring for network extension.
• Three 10/100 Mbps Fast Ethernet switch ports for wired connections.
• Supports WPA, WPA2, and WPS security protocols.

2. Configurare și instalare

Follow these steps to set up your D-Link DHP-1320 Wireless-N PowerLine Router.

2.1 Conținutul pachetului

• D-Link DHP-1320 Wireless-N PowerLine Router
• Cablu Ethernet
• Adaptor de alimentare
• Ghid de instalare rapidă (consultați acest manual pentru instrucțiuni detaliate)

2.2 Conectarea routerului

1. Conectare la alimentare: Plug the power adapter into the router's AC IN port and then into a standard electrical outlet.
2. Conectați-vă la sursa de internet: Connect an Ethernet cable from your modem or existing router's LAN port to the INTERNET port (WAN) on the DHP-1320.
3. Connect Wired Devices: For wired devices (e.g., computers, gaming consoles), connect an Ethernet cable from the device to any of the three LAN ports (1, 2, or 3) on the DHP-1320.
4. Pornire: Apăsați tasta ON/OFF button to power on the router.

Figura 2: Conexiuni panou spate

This image illustrates the rear panel of the DHP-1320, showing the Internet port, LAN ports, Reset button, USB port, ON/OFF switch, and AC IN port. The AP/RT switch is also visible.

2.3 PowerLine AV Pairing

To establish a secure PowerLine network with other D-Link PowerLine AV adapters, follow these steps:

1. Ensure all PowerLine AV devices, including the DHP-1320, are plugged into electrical outlets.
2. Localizați PowerLine Sync Connection (ENY) Button on the side of the DHP-1320.
3. Press and hold the ENY button on the DHP-1320 for 1-3 seconds. The PowerLine AV LED on the front panel should begin to flash.
4. Within two minutes, press and hold the corresponding sync button on your other PowerLine AV adapter for 1-3 seconds.
5. The PowerLine AV LEDs on both devices should turn solid, indicating a successful secure connection.

Figura 3: lateral View with PowerLine Sync Button

This image shows the side of the DHP-1320, highlighting the PowerLine Sync Connection (ENY) button, which is used for pairing with other PowerLine AV devices.

2.4 Configurare Wi-Fi

The DHP-1320 comes with a default Wi-Fi network name (SSID) and password, usually found on a label on the device.

• To connect to Wi-Fi, search for the default SSID on your wireless device and enter the default password.
• For advanced settings, access the router's web-based configuration utility by typing its default IP address (e.g., 192.168.0.1) into a web browser. Refer to the Quick Installation Guide for default login credentials.

3. Funcționare

Understanding the router's indicators and modes of operation.

3.1 Indicatori LED

The front panel LEDs provide status information about the router's operation.

Figura 4: Indicatori LED de pe panoul frontal

This image displays the front panel of the DHP-1320, with labels pointing to the Power LED, Internet LED, WLAN LED, LAN LEDs (1-3), PowerLine AV LEDs, and USB LED, indicating their respective statuses.

3.2 Router Modes (AP/RT Switch)

The DHP-1320 features an AP/RT switch on its rear panel, allowing you to select its operational mode:

• RT (Router) Mode: In this mode, the DHP-1320 acts as a primary router, providing network address translation (NAT) and DHCP services. Connect your modem to the Internet port.
• Mod AP (punct de acces): In this mode, the DHP-1320 functions as a wireless access point, extending an existing network. Connect it to a LAN port of your main router.

Note: Change the AP/RT switch position only when the device is powered off to prevent potential configuration issues.

4. Întreținere

Proper maintenance ensures optimal performance and longevity of your DHP-1320 router.

4.1 Curățare

• Asigurați-vă că dispozitivul este oprit și deconectat înainte de curățare.
• Use a soft, dry cloth to wipe the exterior of the router.
• Do not use liquid cleaners or aerosol sprays, as they may damage the device.
• Păstrați orificiile de ventilație libere de praf și obstacole.

4.2 de actualizări de firmware

Verificați periodic suportul D-Link website for firmware updates. Firmware updates can improve performance, add new features, and fix bugs. Refer to the D-Link website for instructions on how to update the firmware.

4.3 Resetarea routerului

If you encounter persistent issues or forget your login credentials, you may need to reset the router to its factory default settings.

1. Cu routerul pornit, localizați RESET butonul de pe panoul din spate (consultați Figura 2).
2. Use a paperclip or a similar pointed object to press and hold the RESET button for approximately 10 seconds.
3. Release the button when the Power LED begins to flash or all LEDs briefly illuminate.
4. The router will reboot with factory default settings. You will need to reconfigure your network settings.

5. Depanare

This section addresses common issues you might encounter with your DHP-1320 router.

5.1 Fără conexiune la internet

• Verificați cablurile: Ensure the Ethernet cable from your modem is securely connected to the DHP-1320's INTERNET port.
• Stare modem: Verificați dacă modemul funcționează corect și are o conexiune activă la internet.
• Modul router: Confirm the AP/RT switch is set to RT (Router) mode if the DHP-1320 is your primary router.
• Reporniți dispozitivele: Power cycle your modem, then the DHP-1320, and then your connected devices.
• LED Internet: Check if the Internet LED on the front panel is solid green. If not, there might be an issue with your internet service provider or modem connection.

5.2 Probleme de conectivitate Wi-Fi

• LED WLAN: Ensure the WLAN LED is solid or flashing green. If off, Wi-Fi may be disabled.
• SSID și parolă: Verificați că vă conectați la rețeaua Wi-Fi (SSID) corectă și că introduceți parola corectă.
• Puterea semnalului: Mută-te mai aproape de router pentru a verifica dacă puterea semnalului este o problemă.
• Interferență: Other wireless devices or appliances can cause interference. Try changing the Wi-Fi channel in the router's settings.

5.3 PowerLine AV Network Not Connecting

• PowerLine AV LED: Check if the PowerLine AV LED on both devices is solid green. If not, they are not paired or connected.
• Prize electrice: Ensure both PowerLine devices are plugged directly into wall outlets, not power strips or surge protectors.
• Procesul de împerechere: Re-attempt the PowerLine AV pairing process as described in Section 2.3.
• Circuit electric: PowerLine devices work best when on the same electrical circuit. Large appliances or circuit breakers can affect performance.

5.4 Router Requires Frequent Resets

If your router frequently requires reboots or resets to restore functionality, consider the following:

• Firmware: Asigurați-vă că firmware-ul routerului este actualizat.
• Supraîncălzire: Ensure the router has adequate ventilation and is not placed in an enclosed space.
• Alimentare electrică: Verify the power adapter is the original D-Link adapter and is functioning correctly.
• Încărcarea rețelei: Excessive network traffic or too many connected devices might strain the router.
• Resetare din fabrică: As a last resort, perform a factory reset (Section 4.3) and reconfigure the settings carefully.

6. Specificații

Detailed technical specifications for the D-Link DHP-1320 Wireless-N PowerLine Router.

Figura 5: Specificații tehnice de mai susview

This image provides a visual overview of the DHP-1320's technical specifications and a diagram illustrating a typical network setup using PowerLine AV technology.

7. Informații despre garanție

The D-Link DHP-1320 Wireless-N PowerLine Router comes with a Garanție limitată de 1 ani.

For detailed terms and conditions of the warranty, please refer to the warranty card included with your product or visit the official D-Link website. This warranty covers defects in materials and workmanship under normal use.

8. Suport tehnic

If you require further assistance or encounter issues not covered in this manual, please contact D-Link Technical Support.

• Suport online: Visit the official D-Link support website for FAQs, troubleshooting guides, firmware downloads, and contact information.
• Website: www.dlink.com

Please have your product model number (DHP-1320) and serial number ready when contacting support.