D-Link DES-1210-28P PoE+ Web Manual de utilizare Smart Switch

1. Introducere

This manual provides comprehensive instructions for the D-Link DES-1210-28P PoE+ Web Smart Switch. The DES-1210 Series represents the latest generation of D-Link 10/100 Web Smart Switches, incorporating D-Link Green 3.0 technology and compliance with the IEEE 802.3az Energy Efficient Ethernet standard.

Designed for small and medium-sized businesses, this switch offers robust functionality, enhanced security, and simplified manageability. It supports IPv6 management and configuration, ensuring network protection and future compatibility. Multiple management options facilitate quick deployment, infrastructure expansion, and seamless upgrades.

The DES-1210-28P is equipped with a full suite of Layer 2 features, including IGMP Snooping, Port Mirroring, Spanning Tree Protocol, and Link Aggregation Control Protocol (LACP). D-Link's Safeguard Engine provides protection against traffic flooding from malicious attacks. For security, it supports 802.1X port-based authentication, Access Control Lists (ACL), ARP Spoofing Prevention, and DHCP Server Screening.

This model features 24 10/100BASE-TX PoE/PoE+ ports and 4 Gigabit ports – two are dedicated 10/100/1000Mbps copper (RJ45), while the other two are Gigabit “combo” ports, usable with either copper (RJ45) or SFP optical modules. The total PoE power budget for the DES-1210-28P is 193W.

2. Caracteristicile produsului

• Web Comutator inteligent: Features 24 10/100Mbps Ports, 2 10/100/1000BASE-T ports, and 2 combo 10/100/1000BASE-T/SFP ports.
• Caracteristici de securitate: Includes Access Control List (ACL), D-Link Safeguard Engine, and Port Security for robust network protection.
• Management intuitiv: Configurable via SmartConsole or Web-Based GUI. Supports Built-in MIB Browser for SNMP, D-View 6.0 Module, and Compact CLI through Telnet.
• VoIP Application Support: Supports Auto Voice VLAN and DSCP QoS for optimized Voice over IP performance.
• Suport PoE: Complies with 802.3af and 802.3at standards, offering a total PoE budget of up to 193W.
• Smart Fans: Equipped with smart fans for efficient cooling and noise management.

3. Conținutul pachetului

Verificați dacă pachetul dvs. conține următoarele articole:

• D-Link DES-1210-28P PoE+ Web Comutator inteligent
• Rack mount ears (2)
• Accessories package (screws, rubber feet)
• Ghid de instalare rapidă
• Cablu de alimentare

If any items are missing or damaged, please contact your local D-Link reseller for assistance.

4. Suprasolicitare fizicăview

Figura 4.1: Front Panel of the DES-1210-28P Switch. This image shows the front of the D-Link DES-1210-28P switch, highlighting the 24 Fast Ethernet PoE/PoE+ ports, 2 Gigabit RJ45 ports, and 2 Gigabit Combo SFP/RJ45 ports. Status LEDs for power, link/activity, and PoE status are also visible.

Figura 4.2: Rear Panel of the DES-1210-28P Switch. This image displays the rear of the D-Link DES-1210-28P switch, showing the AC power input connector and grounding screw.

5. Configurare și instalare

5.1 Măsuri de siguranță

• Asigurați-vă că sursa de alimentare voltage is compatible with the switch's requirements (100-240V AC, 50/60Hz).
• Nu blocați orificiile de ventilație.
• Avoid placing the switch in areas with high humidity or extreme temperatures.
• Always disconnect power before cleaning or servicing the device.

5.2 Montarea pe rack

The DES-1210-28P switch can be mounted in a standard 19-inch equipment rack. Use the provided rack mount ears and screws to secure the switch to the rack. Ensure adequate airflow around the unit.

1. Attach the two rack mount ears to the sides of the switch using the screws provided.
2. Align the mounting holes on the ears with the holes on the equipment rack.
3. Secure the switch to the rack using appropriate rack screws (not always included with switch).

5.3 Instalare desktop

For desktop installation, attach the included rubber feet to the bottom of the switch to prevent scratching and provide stability. Place the switch on a flat, stable surface with sufficient ventilation.

5.4 Conectarea comutatorului

• Conexiune de alimentare: Connect the provided power cord to the AC inlet on the rear panel of the switch and then to a suitable power outlet.
• Dispozitive de rețea: Connect your network devices (computers, servers, IP cameras, VoIP phones, access points) to the 10/100BASE-TX PoE/PoE+ ports using standard Ethernet cables.
• Conexiuni uplink: Use the Gigabit RJ45 or SFP combo ports for uplink connections to other switches, routers, or network backbone devices.

6. Operarea comutatorului

6.1 Pornirea inițială

Once connected to power, the switch will automatically power on. Observe the Power LED on the front panel; it should illuminate green, indicating normal operation.

6.2 Indicatori LED

The front panel LEDs provide real-time status information:

• LED de alimentare: Verde continuu indică faptul că comutatorul este pornit.
• LED-uri Link/Act (per port):
  • Verde continuu: Este stabilită o legătură de rețea validă.
  • Blinking green: Data activity is occurring on the port.
• PoE Status LEDs (per PoE port):
  • Solid green: PoE power is being supplied to the connected device.
  • Blinking green: PoE fault or overload condition.

6.3 Acces de management

The DES-1210-28P is a Web Smart Switch, primarily managed via a web-based Graphical User Interface (GUI). It also supports SmartConsole and a Compact Command Line Interface (CLI) via Telnet.

1. Web Acces GUI:
   • Connect a computer to any port on the switch.
   • Configurați adresa IP a computerului astfel încât să fie în aceeași subrețea ca și adresa IP implicită a switch-ului (consultați Ghidul de instalare rapidă pentru adresa IP implicită).
   • Deschide a web browser și introduceți adresa IP a switch-ului.
   • Log in using the default username and password (typically "admin" for both).
2. SmartConsole: Use the D-Link SmartConsole utility for network discovery and initial configuration.
3. CLI (Telnet): For advanced users, Telnet access provides command-line configuration options.

Nota: It is highly recommended to change the default login credentials immediately after initial access for security purposes.

7. Întreținere

7.1 Îngrijire generală

• Păstrați comutatorul într-un mediu curat și fără praf.
• Ensure proper ventilation to prevent overheating. Do not obstruct the air vents.
• Avoid exposing the switch to direct sunlight or heat sources.

7.2 Curățare

To clean the exterior of the switch, use a soft, dry cloth. Do not use liquid or aerosol cleaners, as they may damage the device. Always disconnect the power cord before cleaning.

7.3 de actualizări de firmware

Verificați periodic suportul D-Link website pentru actualizări de firmware. Actualizările de firmware pot oferi funcții noi, îmbunătățiri de performanță și securitate. Urmați cu atenție instrucțiunile furnizate în pachetul de actualizare a firmware-ului.

Important: Do not power off the switch during a firmware update process, as this may corrupt the device.

8. Depanare

8.1 Resetare din fabrică

If you encounter persistent issues or forget the management password, you may need to perform a factory reset. This will revert all settings to their default values.

Procedură: Locate the reset button (often a small pinhole) on the front or rear panel. With the switch powered on, use a paperclip or similar pointed object to press and hold the reset button for approximately 5-10 seconds until the LEDs flash. Release the button and allow the switch to reboot. The switch will then be accessible with its default IP address and credentials.

9. Specificații

10. Garanție și asistență

10.1 Informații despre garanție

D-Link products typically come with a limited lifetime warranty. Please refer to the warranty card included with your product or visit the official D-Link website for detailed warranty terms and conditions specific to the DES-1210-28P model.

Warranty coverage generally includes defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or natural disasters.

10.2 Suport tehnic

For technical assistance, product registration, or to download the latest drivers and firmware, please visit the official D-Link support website:

https://www.dlink.com/support

You may also contact D-Link technical support directly via phone or email. Contact information can be found on the D-Link support website or in the Quick Installation Guide.

When contacting support, please have your product model number (DES-1210-28P) and serial number ready.