AMP Research PowerStep Automatic Electric Running Boards

1. Introducere

The AMP Research PowerStep is an automatic, electric-powered running board system designed to provide convenient and safe vehicle access. These steps extend instantly when the vehicle door is opened and retract out of sight when the door closes, maintaining ground clearance and vehicle aesthetics. Constructed from die-cast aluminum alloy with stainless steel pivot pins, the PowerStep offers robust stability and all-weather performance.

Figura 1: AMP Research PowerStep running boards in their retracted position, blending seamlessly with the vehicle's underside.

2. Informații de siguranță

• Tehnologie anti-prindere: The PowerStep system is equipped with 'Anti-Pinch' technology. If an obstruction is detected during retraction, the steps will automatically stop and reverse direction to prevent injury or damage.
• Limită de greutate: Each step board is engineered to support a maximum load of 600 lbs. Do not exceed this weight limit.
• Suprafață texturată: The stepping surface features a textured, slip-resistant design for optimal traction in various weather conditions.
• Iluminare cu LED: Onboard LED lighting illuminates the step and the ground below, enhancing visibility during nighttime use.

3. Conținutul pachetului

Dvs AMP Research PowerStep package includes the following components:

• Two (2) PowerStep running boards (cab-length)
• Vehicle-specific wiring harness
• Suporturi de montare și feronerie
• Modul de control
• LED step lights
• Ghid de instalare

4. Configurare (Instalare)

The AMP Research PowerStep is designed for a professional-quality installation, which can be performed in your own driveway with the right tools and adherence to the provided instructions. A vehicle-specific installation guide and all necessary hardware are included.

1. Review Instrucţiuni: Thoroughly read the entire installation guide specific to your vehicle model before beginning.
2. Montare: Attach the mounting brackets to the vehicle's frame using the provided hardware.
3. Cablaj: Connect the wiring harness to the vehicle's electrical system as detailed in the guide. This typically involves connecting to the vehicle's battery and door trigger wires.
4. Step Attachment: Securely attach the PowerStep boards to the mounted brackets.
5. Lumini LED: Install and connect the LED step lights to the wiring harness.
6. Testare: Test the operation of the PowerSteps by opening and closing each door to ensure proper deployment and retraction.

Note: While designed for straightforward installation, professional installation is recommended for optimal performance and safety.

5. Instrucțiuni de utilizare

• Implementare automată: The PowerSteps will automatically deploy when any vehicle door is opened.
• Retragere automată: The PowerSteps will automatically retract approximately 3 seconds after all vehicle doors are closed.
• Manual Override (for cleaning/roof access): To keep the steps deployed for cleaning or accessing the vehicle roof, apply slight pressure to the step with your foot while closing the door. The step will remain extended until the door is opened again without pressure, or until the vehicle is driven.

Figure 2: The PowerStep automatically deploys when the door is opened, providing a convenient step.

6. Întreținere

• Curățare regulată: Keep the step surfaces clean from dirt, mud, and debris. The steps can be sprayed down and washed while deployed.
• Pivot Pin Inspection: Periodically inspect the stainless steel pivot pins for any signs of wear or corrosion. These pins are designed to be rust-proof for long-lasting operation.
• Lubrifiere: Apply a silicone-based lubricant to the pivot points annually or as needed to ensure smooth operation.

Figura 3: Prim-plan view of the PowerStep's textured, slip-resistant surface and integrated LED lighting.

7. Depanare

• Pași care nu se implementează/retrag:
  1. Verificați toate conexiunile electrice pentru etanșeitate și coroziune.
  2. Asigurați-vă că bateria vehiculului are suficientă încărcare.
  3. Inspect the steps for any physical obstructions that might be preventing movement.
  4. Verify the control module connections. In some cases, a faulty controller may need replacement (refer to customer support).
• Zgomote neobișnuite: Lubricate pivot points as described in the Maintenance section. If noises persist, inspect for loose components or damage.

Pentru asistență suplimentară, vă rugăm să contactați AMP Cercetează asistența pentru clienți.

8. Specificații

9. Garanție și asistență

AMP Research stands behind its products with a comprehensive 5-year/60,000-mile warranty. For warranty claims, technical support, or any product-related inquiries, please refer to the contact information provided in your product packaging or visit the official AMP Cercetare website-ul.