Introducere
The Technoline WS 9140-IT is a temperature station designed for monitoring both indoor and outdoor temperatures. It features a DCF-77 radio-controlled clock for automatic time synchronization, an alarm with snooze function, and records minimum and maximum temperature values. This device can be conveniently placed on a table or mounted on a wall.
Conținutul pachetului
Vă rugăm să verificați dacă toate componentele sunt prezente în pachet:
- 1 x WS 9140-IT Base Station
- 1 x TX37-IT Outdoor Sensor
- Manual de utilizare (acest document)
Produs terminatview
The Technoline WS 9140-IT consists of a main base station and a wireless outdoor sensor. The base station displays time, indoor temperature, and outdoor temperature. It also features control buttons for settings and functions.
Figura 1: Technoline WS 9140-IT Temperature Station and its packaging.
Figura 2: Faţă view of the base station and the outdoor sensor, showing display elements and technical specifications.
Base Station Display Elements:
- Afișare timp: Shows current time, synchronized via DCF-77 radio signal.
- Temperatura interioară: Displays the temperature measured by the base station.
- Temperatura exterioara: Displays the temperature received from the wireless sensor.
- MIN/MAX Indicators: Shows recorded minimum and maximum temperatures.
- Indicator baterie: Alerte când bateriile sunt descărcate.
Butoane de control:
- A STABILIT: Enters setting mode.
- ALARMA: Activates/deactivates alarm and enters alarm setting mode.
- MIN/MAX RESET: Displays minimum/maximum values and resets them.
- „+” / „-”: Adjusts values during setting or changes display options.
Înființat
1. Instalarea bateriei
For the Outdoor Sensor (TX37-IT):
- Open the battery compartment cover on the back of the outdoor sensor.
- Insert 2 x AA Mignon LR06 batteries, observing the correct polarity (+/-).
- Închideți bine capacul compartimentului bateriei.
For the Base Station (WS 9140-IT):
- Open the battery compartment cover on the back of the base station.
- Insert 2 x AA Mignon LR06 batteries, observing the correct polarity (+/-).
- Închideți bine capacul compartimentului bateriei.
Note: Always insert batteries into the outdoor sensor first, then into the base station to ensure proper synchronization.
2. Plasarea senzorului
Place the outdoor sensor in a shaded, dry location, protected from direct sunlight and rain, to ensure accurate temperature readings. The maximum transmission distance is 100 meters in open air. Avoid placing it near large metal objects or electrical appliances that may interfere with the signal.
3. Initial Synchronization (DCF-77 Radio Clock)
After battery installation, the base station will automatically begin searching for the DCF-77 radio signal. This process may take several minutes. Once the signal is received, the time will be set automatically. A radio tower icon will appear on the display, indicating successful synchronization.
4. Manual Time Setting (Optional)
If the radio signal is not available or if you prefer to set the time manually:
- Țineți apăsat butonul SET apăsați butonul până când cifrele orei clipesc.
- Utilizați „+” or '-' butoane pentru a regla ora.
- Presa SET again to confirm and move to minute setting.
- Utilizare „+” or '-' pentru a regla minutele.
- Presa SET to confirm and exit manual time setting.
5. Ajustarea fusului orar
To adjust for different time zones (± 12 hours):
- În modul normal de afișare a orei, apăsați și mențineți apăsat butonul SET apăsați butonul până când cifrele orei clipesc.
- Presa SET repeatedly until the time zone offset (e.g., '00') flashes.
- Utilizați „+” or '-' buttons to adjust the time zone offset.
- Presa SET pentru a confirma și a ieși.
Instrucțiuni de operare
1. Temperatura de citire
The current indoor and outdoor temperatures are continuously displayed on the base station's screen.
2. Minimum/Maximum Temperature Recording
The station automatically records the minimum and maximum indoor and outdoor temperatures since the last reset.
- Apăsați tasta MIN/MAX RESET button once to display the maximum recorded temperatures.
- Apăsați tasta MIN/MAX RESET button a second time to display the minimum recorded temperatures.
- Țineți apăsat butonul MIN/MAX RESET button to clear the recorded minimum and maximum values. The display will show the current temperatures, and new min/max values will begin recording.
3. Alarm Setting and Snooze Function
Setarea alarmei:
- Apăsați tasta ALARMA apăsați butonul o dată pentru a afișa ora alarmei.
- Țineți apăsat butonul ALARMA apăsați butonul până când cifrele orei alarmei clipesc.
- Utilizați „+” or '-' butoane pentru a regla ora alarmei.
- Presa ALARMA again to confirm and move to alarm minute setting.
- Utilizare „+” or '-' pentru a ajusta minutele alarmei.
- Presa ALARMA pentru a confirma și a părăsi setarea alarmei.
Activarea/dezactivarea alarmei:
- În modul normal de afișare a orei, apăsați tasta ALARMA button repeatedly to toggle the alarm ON or OFF. An alarm icon will appear on the display when the alarm is active.
Funcție de amânare:
- Când sună alarma, apăsați orice buton (cu excepția ALARMA) to activate the snooze function. The alarm will sound again after approximately 5 minutes.
- To stop the alarm completely, press the ALARMA button when it is sounding.
4. Indicator baterie descărcată
A low battery icon will appear on the display when the batteries in either the base station or the outdoor sensor need to be replaced. Replace all batteries promptly to ensure continuous operation and accurate readings.
Întreţinere
1. Înlocuirea bateriei
When the low battery indicator appears, replace the batteries in both the base station and the outdoor sensor. Use 2 x AA Mignon LR06 batteries for each unit. Ensure correct polarity during installation.
2. Curatenie
Ștergeți unitățile cu o lavetă moale șiamp lavetă. Nu utilizați substanțe de curățare abrazive sau solvenți, deoarece acestea pot deteriora afișajul sauasing. Ensure the units are dry before re-inserting batteries or operating.
Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| No outdoor temperature display or '---' | No signal from outdoor sensor; Batteries in sensor are low or incorrectly inserted; Sensor too far from base station or obstructed. | Check sensor batteries and polarity. Move sensor closer to base station. Avoid obstructions like thick walls or metal objects. Re-synchronize by removing and re-inserting batteries in both units (sensor first). |
| Afișare incorectă a orei | DCF-77 signal not received; Incorrect time zone setting. | Ensure base station is placed away from electronic interference. Allow time for automatic synchronization. Manually set time or adjust time zone if necessary. |
| Afișajul este slab sau gol | Low batteries in base station. | Înlocuiți bateriile din stația de bază. |
| Alarma nu sună | Alarm is not activated; Alarm time is incorrectly set. | Ensure the alarm icon is visible on the display. Verify the alarm time setting. |
Specificații
- Model: WS 9140-IT
- Marca: Technoline
- Base Station Dimensions (L x W x H): 73 x 25 x 158 mm
- Outdoor Sensor Dimensions (L x W x H): 38 x 21 x 128 mm
- Base Station Power: 2 x AA Mignon LR06 batteries (not included)
- Putere senzor exterior: 2 x AA Mignon LR06 batteries (not included)
- Interval de temperatură interioară: -10°C până la +40°C
- Interval de temperatură exterioară: -40°C până la +60°C
- Frecvența de transmisie: 868 MHz
- Distanța de transmisie: Până la 100 de metri (câmp deschis)
- Caracteristici speciale: DCF-77 Radio-controlled clock, Manual time setting option, Time zone adjustment (± 12 h), MIN/MAX temperature memory, Alarm with snooze function, Low battery indicator, Wall mount or table stand.
- Material: Plastic
Figura 3: The Technoline WS 9140-IT base station can be wall-mounted for convenient viewing.
Garanție și suport
Specific warranty information and detailed support contacts are not provided in the product data. For warranty claims or technical assistance, please refer to the documentation included with your purchase or contact the retailer where the product was acquired. You may also visit the official Technoline website for general support information.