Progress Lighting P3689-44 Two-Light Close-to-Ceiling Fixture Instruction Manual

Introducere

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting P3689-44 Two-Light Close-to-Ceiling Fixture. Please read all instructions carefully before beginning installation and retain this manual for future reference.

The P3689-44 fixture features a clean design with elegant lines, complemented by a satin Oxford Silver finish and an etched alabaster style glass shade. Its unique twist-lock shade design allows for easy access for changing light bulbs without external hardware.

Informații de siguranță

AVERTIZARE: Risc de electrocutare. Deconectați alimentarea de la cutia de siguranțe sau de la întrerupătorul de circuit înainte de instalare sau service.

ATENŢIE: For your safety, read and understand the information provided in this manual completely before attempting to assemble, install, or operate this product. Failure to do so could lead to electric shock, fire, or other injuries that could be hazardous or even fatal.

• Toate conexiunile electrice trebuie să fie în conformitate cu codurile locale, ordonanțele sau Codul Electric Național (NEC).
• Consultați un electrician calificat dacă nu sunteți sigur de procedurile de cablare.
• Folosiți doar conectori de cablu omologați UL/cUL.
• Nu depășiți puterea maximătage specificat pentru becuri.
• Asigurați-vă că corpul de iluminat este montat în siguranță pe un element structural al tavanului.

Conținutul pachetului

Carefully unpack your fixture and check that all parts are included. If any parts are missing or damaged, contact Progress Lighting customer service before proceeding.

• Corp de fixare (1)
• Abajur de sticlă (1)
• Mounting hardware kit (1)
• Manual de utilizare (1)

Configurare și instalare

Instrumente necesare (nu sunt incluse):

• Șurubelniță Phillips
• Șurubelniță cu cap plat
• Stripteuze sârmă
• Bandă electrică
• Ochelari de protecție

Pașii de instalare:

1. Opriți alimentarea: Before starting installation, ensure the power to the circuit is turned off at the main fuse box or circuit breaker.
2. Pregătirea montajului: Attach the mounting bracket to the junction box in the ceiling using the screws provided in the hardware kit. Ensure the bracket is securely fastened.
3. Cablaj: Conectați firele corpului de iluminat la firele casei conform următoarelor instrucțiuni:
   • Conectați negru cablu de fixare la negru (hot) house wire.
   • Conectați alb cablu de fixare la alb (neutral) house wire.
   • Conectați aramă goală firul de fixare (împământare) la green or bare copper (ground) house wire.
   Fixați toate conexiunile cu conectori de sârmă și înfășurați-le cu bandă izolatoare pentru o siguranță sporită.
4. Mount fixture body: Carefully push the wired fixture body up to the ceiling, aligning the screw holes on the fixture with the screws on the mounting bracket. Secure the fixture body in place with the decorative nuts or screws provided.
5. Instalați becurile: Insert two (2) 60-watt maximum medium base bulbs (not included) into the sockets. Do not exceed the recommended wattage.
6. Attach glass shade: Align the glass shade with the fixture body and twist it clockwise until it locks securely into place. The unique twist-lock design ensures the shade is held firmly without visible hardware.

Image: The Progress Lighting P3689-44 Two-Light Close-to-Ceiling Fixture, showcasing its Oxford Silver finish and etched alabaster style glass shade. The fixture is designed for flush mounting to the ceiling.

Instrucțiuni de operare

Once the fixture is fully installed and bulbs are in place, restore power at the main fuse box or circuit breaker. The fixture is operated via a standard wall switch (not included) connected to the circuit.

• Asigurați-vă că este corecttage bulbs (max 60-watt medium base) are used to prevent overheating or damage.
• The fixture is designed for indoor use in dry locations only.

Întreţinere

curatenie:

To clean the fixture, ensure power is turned off. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, polishes, or solvents as they may damage the finish or glass. For the glass shade, a mild glass cleaner can be used sparingly on a cloth, then wiped dry.

Înlocuire bec:

To replace bulbs, turn off power at the circuit breaker. Gently twist the glass shade counter-clockwise to remove it. Unscrew the old bulbs and replace them with new 60-watt maximum medium base bulbs. Reattach the glass shade by twisting it clockwise until secure.

Depanare

Specificații

Garanție și suport

Acest corp de iluminat Progress Lighting este acoperit de un Garanție de 1 an de la producător de la data achiziției. Această garanție acoperă defectele de materiale și de fabricație în condiții normale de utilizare.

For warranty claims, technical support, or replacement parts, please contact Progress Lighting customer service. Keep your purchase receipt as proof of purchase.

Progress Lighting Customer Service: Refer to the official Progress Lighting website-ul sau ambalajul produsului pentru informații de contact actuale.