Risco Lunar PIR 360 Degree Ceiling Motion Sensor

1. Introducere

This manual provides essential information for the proper installation, operation, and maintenance of the Risco Lunar PIR 360 Degree Ceiling Motion Sensor (Model RK2000DPC). This device is designed to detect motion within a 360-degree field of view when mounted on a ceiling, utilizing passive infrared (PIR) technology. Please read these instructions carefully before proceeding with installation or use.

2. Informații de siguranță

• Installation should only be performed by qualified personnel in accordance with all local and national electrical codes.
• Disconnect power to the installation area before performing any wiring or maintenance.
• Nu expuneți dispozitivul la umiditate sau temperaturi extreme în afara intervalului de funcționare specificat.
• Avoid mounting the sensor near heat sources, direct sunlight, or strong air currents, as these can cause false alarms.
• Asigurați o împământare corespunzătoare acolo unde este necesar.

3. Conținutul pachetului

Verificați dacă toate componentele sunt prezente înainte de a începe instalarea:

• Risco Lunar PIR 360 Degree Ceiling Motion Sensor (RK2000DPC)
• Hardware de montare (șuruburi, ancore)
• Manual de utilizare (acest document)

4. Configurare și instalare

The Risco Lunar PIR sensor is designed for ceiling mount installation. Optimal performance is achieved when mounted at a height of up to 4 meters (13 feet).

Figure 1: Risco Lunar PIR 360 Degree Ceiling Motion Sensor (RK2000DPC). This image shows the compact, low-profile design of the white circular sensor, suitable for discreet ceiling installation.

4.1 Locul de montare

• Choose a central location on the ceiling that provides the desired 360-degree coverage without obstructions.
• Avoid areas with direct drafts from HVAC vents or windows, as rapid temperature changes can trigger the sensor.
• Asigurați-vă că suprafața de montare este stabilă și poate susține dispozitivul.

4.2 Instrucțiuni de cablare

The sensor operates on a DC voltage supply. Refer to the following specifications for wiring:

• Vol. De operaretage: 9 până la 16 VDC
• Consum curent: 25mA la 12V
• Alarm Contacts: 100mA, 24V, N.C. (Normally Closed)
• Tamper Contacts: 100mA, 24V, N.C. (Normally Closed)

1. Carefully open the sensor housing to access the terminal block.
2. Connect the power supply wires to the designated terminals (typically marked + and - or VCC and GND).
3. Connect the alarm output wires to your alarm control panel's zone input.
4. Conectați tamper switch wires to the control panel's tamper circuit, if applicable.
5. Asigurați-vă că toate conexiunile sunt sigure și izolate.

4.3 Initial Power-Up and Walk Test

1. After wiring, carefully close the sensor housing.
2. Apply power to the sensor. Allow a few minutes for the sensor to stabilize.
3. Perform a walk test by moving through the detection area. The sensor features a Walk Test Display (1 LED) which will illuminate to indicate detection.
4. Adjust the sensor's position or sensitivity if necessary to achieve optimal coverage and avoid false triggers.

5. Principii de funcționare

The Risco Lunar PIR sensor uses advanced passive infrared technology to detect changes in infrared energy caused by human body movement.

• Detection Technologies: Dual element PIR for enhanced reliability.
• PIR Lens Coverage: 110° angle, providing a full 360° overview from a ceiling mount.
• Zone de detectare: 60 zones, comprising 30 Fresnel facets arranged in 3 optical levels (12 external, 12 middle, and 6 internal facets) for comprehensive coverage.
• Sensibilitate reglabila: Allows fine-tuning of the sensor's responsiveness to movement.
• Variable Pulse Count: Configurable setting (1, 2, or 3 pulses) to adjust the number of detected pulses required to trigger an alarm, helping to reduce false alarms.
• Compensarea temperaturii: Automatic thermistor-controlled compensation ensures stable detection performance across varying ambient temperatures (0°C to 55°C / 32°F to 131°F).
• Optical Filtering: Provides white light protection to prevent false alarms from sudden changes in illumination.
• Imunitate RF: Designed with superior immunity to radio frequency interference (30V/m from 10MHz to 1GHz).

6. Întreținere

To ensure continued optimal performance of your Risco Lunar PIR sensor, follow these maintenance guidelines:

• curatenie: Periodically clean the sensor lens with a soft, dry, lint-free cloth. Do not use abrasive cleaners or solvents.
• Inspecţie: Annually inspect the sensor for any physical damage, loose wiring, or obstructions to its field of view.
• Test de funcționalitate: Perform a walk test periodically to confirm the sensor is detecting motion correctly.

7. Depanare

If you encounter issues with your Risco Lunar PIR sensor, refer to the following common problems and solutions:

8. Specificații

Detailed technical specifications for the Risco Lunar PIR 360 Degree Ceiling Motion Sensor (RK2000DPC):

• Marca: Risco
• Număr de model: RK2000DPC (also referred to as RK2000UPC in some documentation)
• Culoare: Alb
• Sursa de alimentare: Electric cu fir
• Vol. De operaretage: 9 până la 16 VDC
• Consum curent: 25mA la 12V
• Alarm Contacts: 100mA, 24V, N.C.
• Tamper Contacts: 100mA, 24V, N.C.
• Detection Technologies: Dual element PIR
• PIR Lens Coverage: 110° angle, 360° overview
• Zone de detectare: 60 (30 Fresnel facets in 3 optical levels)
• Optical Filtering: Protectie la lumina alba
• Selectable Pulse Count: 1, 2, 3
• Compensarea temperaturii: Automatic thermistor-controlled
• Imunitate RF: 30V/m de la 10MHz la 1GHz
• Walk Test Display: 1 LED-uri
• Temperatura de functionare: 0°C până la 55°C (32°F până la 131°F)
• Temperatura de depozitare: -20°C până la 60°C (-4°F până la 140°F)
• Dimensiuni (diametru x inaltime): Ø135 x 27mm (Ø5.3" x 1.1")
• Înălțimea de instalare: Până la 4 m (13 ft)
• Greutatea articolului: 4.8 uncii
• Tip de montare: Montare pe tavan
• UPC: 875586001303
• ASIN: B000GLY5O0

9. Garanție și asistență

Risco products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Risco website. For technical support, troubleshooting assistance, or service inquiries, please contact your authorized Risco dealer or distributor.

Păstrați la îndemână bonul fiscal și numărul de serie al produsului atunci când contactați serviciul de asistență.